If you’re using an HP envy printer, you may be wondering how to find the WPS pin. This can be useful for connecting to a wireless network without needing to enter a password in future. The process is relatively similar to how you find WPS pin for HP Deskjet, and this article will walk you through the steps.
Keep in mind that not all networks use WPS, so it’s always best to check with your provider before trying to connect. This quick and easy guide will show you exactly how to do that.
Also keep in mind that the WPS pin is different for each device, so if you’re using any of the following HP envy printer model; 6400, 5540, 6000, 4520, 5000,4500, 6200, 7640, 5052, 6455e, 7800, 5055, 5540, 4510, 4512, 5660, 6055e, 6400,7645, 7100, 7858, 6455, 7640, make sure you follow the instructions specific to your own model.
You can verify your printer model just like how you would check your laptop model number.
What Is A WPS Pin?
A WPS pin is a code that is used to connect devices to a wireless network. This code is typically found on the back or bottom of a router or access point. When prompted, enter the WPS pin into the device you are connecting to the network. This will allow the device to connect to the network and gain access to the internet.
What Is The WPS Pin On HP Envy Printer?
The WPS Pin on HP Envy is a Wireless Protected Setup and is used to connect your printer to a wireless network.
The WPS Pin on your HP Envy is a security feature that allows you to control who can access your wireless network. By default, the WPS Pin is turned off. If you enable it, you will need to enter the WPS Pin when connecting a new device to your wireless network.
How To enable the WPS Pin on HP Envy Printer:
1. Press the Wireless button on the control panel.
2. Select Settings.
3. Select Wireless Setup Wizard.
4. Follow the prompts to enable the WPS Pin.
When prompted, enter the WPS Pin on your HP Envy. The default pin is usually located on a sticker on the bottom of the router. Once you have entered the Pin, the new device will be connected to your wireless network.
You may have noticed that the WPS pin is also requested when you are trying to connect Airpods to your HP laptop.
Where To Find The WPS Pin On HP Envy Printer?
This PIN is located on the back of your printer. To find the PIN, look for the label that says “Wireless Protected Setup.” The PIN will be listed on this label.
Also, the WPS pin on your HP Envy Printer can be found on the control panel, under the Setup or Network menus. If you’re using a wireless router, the WPS pin will be located on the router itself.
For instructions on how to find the WPS pin on your specific printer model, consult your printer’s manual. Once you have located the WPS pin, you can use it to connect your printer to a wireless network or connect it to a laptop.
Types Of WPS Connection For HP Envy Printer
There are four types of WPS connection for HP Envy printer.
Physical button method – To connect using this method, you will need to press the WPS button on your router and then press the WPS button on your printer within two minutes.
PIN method – To connect using this method, you will need to enter the PIN from your router into
Push Button Configuration (PBC) method – To connect using this method, you will need to push a button on your router and then push a button on your printer within two minutes.
NFC tag method – To connect using this method, you will need to tap your NFC-enabled device on the NFC tag on your printer.
How To Connect HP Envy Printer To Your Laptop
If your HP Envy printer is not connecting to your laptop, there are a few things you can try to troubleshoot the issue.
First, make sure that both the printer and the laptop are turned on and that they are connected to the same wireless network. If they are not, you will need to connect them before proceeding.
Once they are both connected to the same network, you should be able to connect the printer to the laptop by following these steps:
1. On the laptop, open the Settings app and go to Devices.
2. Select Printers & scanners from the list of options.
3. Click on Add a printer or scanner. This will search for available printers on the network.
4. Select your HP Envy printer from the list and follow the on-screen instructions to finish adding it.
If you are still having trouble connecting the printer to the laptop, you may need to restart both devices or try using a different USB port.