If you’ve just received a new Hp laptop, the first thing you’ll want to do is turn it on. This guide will show you how to power up your device and start using it.
Depending on your model, there are a few different ways to do this. We’ll walk you through each one. So, let’s get started!
Where Is The Power Button On Hp Laptop?
There are three possible places to find locate the power button on hp laptop depending on your model. You can easily lookup your serial number behind your computer identify the model.
- Above the power button
- By the sides of the hp laptop
- Within the keyboard
The power button on an HP laptop is typically located on the top-right side of the keyboard, near the screen.
It may also be located on the side of the laptop, depending on the model. If you cannot find the power button on the top-right side of the keyboard or by the sides of the laptop, you may want to look at each individual keys on your keyboard to see if any of them have a power symbol.
The location of the power button on your keyboard keys will be at the extreme edges of your keyboard just like the esc key. In some cases, you may need to look closer at the F keys where the Wi-Fi button to connect to internet is.
If you have located it and your HP laptop power button is not working, we have several resources on our blog to help you resolve it.
How To Turn On A Hp Laptop
Click On The Power Button Once
If your computer is plugged in, the easiest way to turn it on is by pressing the power button. You’ll find this button on the front of your HP laptop. Once you press it, your computer should start up.
If your HP laptop is running low on battery, you may need to plug it in before you can turn it on. To do this, locate the charging port on the side or back of your laptop and insert the charging cable.
Once your laptop is plugged in, you should be able to press the power button and start it up.
Once your HP laptop is turned on, you can begin using it like normal while taking advantage of NFC which several people aren’t aware about.
Hold Down The Power Button
To turn on a HP laptop, first locate the power button on the right side of the device. Press and hold the button for two to three seconds until the screen turns on.
If the computer does not boot up, check to make sure that the power cord is securely plugged in and that the outlet is working. Once the computer is on, you can release the power button.
Charge Your Laptop Before Clicking On The Power Button
Before you can turn on your HP laptop, you need to make sure that it is fully charged. To do this, simply plug the laptop into a power outlet using the appropriate charging cable.
Once the laptop is plugged in, you should see a light on the charging port that indicates that the device is currently charging.
Once the laptop has a full charge, you can press the power button to turn on the device. You may need to hold down the power button for a few seconds before the laptop turns on.
Once it’s on, you can release the power button and begin using your HP laptop.
Why Is My Hp Laptop Not Turning?
All HP laptop users have experienced a time where their laptop will not turn on. There are many reasons why your laptop may not be turning on, some more serious than others.
Below, we will outline the most common reasons why your HP laptop is not turning on and how to fix them. So, if you are currently experiencing this problem, keep reading.
These are the reasons:
1. The Battery May Be Dead Or Unplugged.
A hp laptop not turning on can have various causes, some of which are simple to fix while others may require more extensive troubleshooting.
One of the most common reasons a hp laptop won’t turn on is because the battery is either dead or unplugged from the power source.
If this is the case, simply plugging in the power cord and/or replacing the battery should get the laptop up and running again.
You can easily know this is a battery issue when your hp laptop shuts off randomly while on battery power.
2. There Could Be A Problem With The AC Adapter.
Another possibility is that the AC adapter is unplugged from the laptop or from the power outlet.
Check both ends of the adapter to make sure they are firmly plugged in and also check to see if the outlet has power by plugging in another device.
If everything appears to be plugged in correctly but the laptop still won’t turn on, the power button may be broken. In this case, unfortunately, the only solution is to have the laptop repaired or replaced.
3. A Hardware Component May Be Loose Or Damaged.
Another potential issue could be that a component inside the laptop has become loose or defective.
This is usually not something that can be fixed at home and will require professional repair. Likewise, if the laptop is overheating, it will need to be serviced in order to prevent further damage.
4. The Laptop May Be Overheating.
If your HP laptop is not turning on, it may be because it is overheating. Overheating can cause all sorts of problems for laptops, including causing them to shut down abruptly or not turn on at all.
If your laptop has been getting hot lately, particularly when you’re using it for gaming or other resource-intensive activities, that could be the problem.
Letting it cool down for a while before trying to turn it on again may help. If the problem persists, you may need to boot up till you see the window logo just to know if the automatic repair can fix it.
5. The Power Button Could Be Malfunctioning.
A malfunctioning power button can cause a hp laptop not to turn on. If the power button is not functioning properly, it may not be able to send the signal to the computer to start up.
This can be a frustrating issue, as it can prevent you from using your laptop at all. There are a few things that you can try if you are having this issue.
First, you can try restarting your HP laptop by holding down the power button for a few seconds. If this does not work, you may need to replace the power button itself.
This is usually a relatively simple process and can be done with a screwdriver and some replacement parts.
However, if you are not comfortable doing this yourself, you may want to take your laptop to a professional to have it repaired.
6. There May Be A Problem With The Operating System.
A problem with the operating system can cause a laptop to not turn on. This can be due to a number of factors, including corrupt files, incompatible software, or hardware issues.
If the laptop is unable to boot up properly, it may display an error message or simply refuse to turn on.
In some cases, a laptop may appear to turn on but then quickly shut off again; this can indicate that there is a problem with the power supply or the battery.
If you are experiencing any of these issues, it is best to contact a qualified technician for help.
7. The Computer’s BIOS Could Be Corrupted.
Lastly, it’s possible that the laptop’s BIOS is corrupted. This can often be fixed by resetting the BIOS, but if that doesn’t work then the only other solution is to reinstall the BIOS.
Mak sure you are familiar with your HP BIOS password before you proceed to reinstall the BIOS.
This is a more complex repair that should only be attempted by someone with experience and knowledge about laptops and computer components.
Note that any changes made to your BIOS could reset some basic settings which will require you to change the date and time back to the correct information.
Quick tip: Remember to unlock the touchpad on your Hp laptop whenever you decide to navigate in your BIOS.
How To Turn On Hp Laptop When It Won’t Turn On
Reset Cmos Battery
If your laptop won’t turn on, one possible reason could be a depleted CMOS battery. In this case, you can try resetting the CMOS battery to see if it solves the problem.
To reset the CMOS battery, first locate it on your motherboard. It should be a small, round battery. Once you’ve found it, unplug your computer’s power cord and remove the battery.
Wait a few minutes, then replace the battery and plug in the power cord. Your computer should now boot up normally.
Re Insert Your Ram
If your HP laptop won’t turn on, one possible reason could be that the RAM is loose. Re-inserting the RAM into its socket may help fix the problem.
First, make sure that the power is off and the laptop is unplugged. Then remove the battery and unscrew the panel on the back of the laptop to access the RAM.
Gently remove the old RAM from its socket and insert the new RAM into place. Make sure it is firmly inserted and then screw the panel back on.
Replace the battery and try turning on your laptop again. This simple fix could get your HP laptop up and running again.
If this method actually help, you can consider learning how to disable insert key on Hp laptop to avoid conflict with your power button.
Wait For Your Laptop To Cool Down
If your laptop is overheating, it’s important to cool it down as quickly as possible. One way to do this is to turn it off and unplug it from its power source, then wait for it to cool down completely.
Once it’s cooled down, you can try turning it on again.
If it still won’t turn on, there may be a more serious problem that you’ll need to take care of.
Get Rid Of Dust
When your HP laptop won’t turn on, one possible reason could be because of dust build-up in the vents. Over time, dust can accumulate and block the vents, preventing proper airflow.
This can then lead to overheating, which can cause all sorts of problems, including not being able to turn on your laptop.
To clean the dust out of the vents, you’ll need to open up your laptop and use a can of compressed air. Once you’ve cleared out the vents, try turning on your laptop again and see if that does the trick.
When you begin to notice that your laptop fan is getting to loud, you would have to reduce the fan noise by getting rid of the built up dust.
Replace Your Power Button
If your HP laptop won’t turn on, one possible reason could be a faulty power button. In this case, replacing the power button may help resolve the issue.
To do this, you will need to purchase a new power button and then follow these steps:
1. First, locate the old power button on your HP laptop.
2. Next, unscrew the old power button and remove it from the device.
3. Then, take your new power button and screw it into place.
4. Finally, test out the new power button to see if it turns on your HP laptop successfully. If it does, then great! You’ve now fixed your problem. But if not, then you may need to consult with a professional to help diagnose and resolve the issue.
How To Turn On Hp Laptop With Keyboard
If you have a hp laptop, you can turn it on by using the power button on the keyboard.
To do this, simply press and hold the power button for a few seconds. The laptop will then boot up and you will be able to use it.
Alternatively, you can also use the power button to turn on the laptop by pressing and holding it for a few seconds.
However, if you want to use the laptop in a more traditional way, you can press the power button once and then release it after a couple of seconds. The laptop will then start up normally.
If this method doesn’t work, you should first unlock your HP keyboard and then try the method all over again.
How To Turn On Hp Laptop Without Power Button
If your HP laptop has a power button that isn’t working, you can still turn on your laptop without it by using your keyboard.
Using your keyboard to turn on your hp laptop without power button will require you to change some settings in your bios.
The first step is to boot into bios. To do this, you will need to press a key combination as soon as your laptop starts up. The key combination is usually F2, F10, or Esc.
Once you’re in the bios, navigate to the ‘Power Management Settings’. Inside this settings, you will need to enable the ‘Power on by keyboard function’ feature.
After that you should save and turn off your hp laptop. To turn it back on using your keyboard will simply require you press any key on the keyboard to turn it on.
How To Turn On Hp Laptop Spectre
The power button is located at the top left edge of the laptop, near the hinge.
To turn on your HP Spectre, simply press the power button once and wait for the HP logo to appear on the screen, and then the computer will boot up as usual.
How To Turn On Hp Laptop Elitebook
To turn on your hp laptop EliteBook, simply locate the power button on the left side of the screen.
Above the volume buttons, you will see the power button. Once you have located the power button, simply press and hold it down for a few seconds until the computer powers on.
That’s all there is to it! If you have any further questions about using your EliteBook, feel free to consult your user manual or contact HP customer support. Thanks for choosing HP!
How To Turn On Hp Pavilion Laptop
1. Plug in your laptop to a power outlet using the AC adapter.
2. Press the power button for about 3 seconds, or until the white LED on the power button lights up. You will find the power button by the left side of the keyboard.
3. Release the power button. Your laptop will now begin to boot up.
4. Once your laptop has finished booting up, you will be able to use it as normal.